-www.iamtechnical.com-

Experiment: Simple Sequencing Control for Two Cylinders

In a press, briefly pressing button S2 should cause cylinder M1 to push a workpiece into position to be worked on. Once the cylinder has reached its limit, cylinder M2 should extend to press the piece. Both cylinders should remain extended until button S3 is pressed. The machinery is switched on using switch S1.

simple-sequencing-control-two-cylinders.gif

Construct the pneumatic and electrical circuits as shown below:

simple-sequencing-control-two-cylinders.jpg

 

More From Iamtechnical.com

Facebook Like For Iamtechnical.com !